R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

113
Description
Use terminal debugging to enable the display of debugging information on the current terminal.
Use undo terminal debugging to disable the display of debugging information on the current terminal.
By default, the display of debugging information on the current terminal is disabled.
To view the debugging information, you need to execute the terminal monitor and terminal debugging
commands, then enable information center (enabled by default), and finally use a debugging command
to enable the related debugging.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the display of debugging information on the terminal restores
the default.
Examples
# Enable the display of debugging information on the current terminal.
<Sysname> terminal debugging
Info: Current terminal debugging is on.
terminal logging
Syntax
terminal logging
undo terminal logging
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use terminal logging to enable the display of log information on the current terminal.
Use undo terminal logging to disable the display of log information on the current terminal.
By default, the display of log information on the current terminal is disabled.
To view the log information, you need to execute the terminal monitor and terminal logging commands,
and then enable information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the display of log information on the terminal restores the
default.
Examples
# Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
Info: Current terminal logging is off.