R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

117
Table 26 Command output
Field Descri
p
tion
flow Configuration and statistics about flow logs.
No userlog export is enabled
Flow logs are not sent to the log server at present. It may be because
exporting flow logs to the log server is not configured, or flow logs are
sent to the information center. (Support for this field depends on the
device model.)
Export Version 1 logs to log server Export flow log packets of version 1.0 to the log server.
Source address of exported logs
Source IP address of the flow logging packets (this field will not be
displayed if the source IP address is not configured.)
Address of log server Address of the log server, including IP address and port number.
VPN-instance
VPN instance name of the VPN to which the flow logging server belongs.
(VPN instance name can be specified only when the log server is
specified by an IPv4 address.)
Total logs/UDP packets exported
Total number of flow logs exported and total number of the UDP packets
carrying these flow logs (a UDP packet may carry multiple flow logs.)
Logs in buffer Total number of flow logs in the cache.
reset userlog flow export
Syntax
reset userlog flow export
View
User view
Default level
2: System level
Parameters
None
Description
Use reset userlog flow export to clear statistics about flow logs.
Related commands: display userlog export.
Examples
# Clear statistics about flow logs.
<Sysname> reset userlog flow export
reset userlog flow logbuffer
Syntax
reset userlog flow logbuffer
View
User view