R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

120
userlog flow export source-ip
Syntax
userlog flow export source-ip ip-address
undo userlog flow export source-ip
View
System view
Default level
2: System level
Parameters
ip-address: Specifies the source IP address for a flow logging packet.
Description
Use userlog flow export source-ip to configure the source IP address of flow logging packets.
Use undo userlog flow export source-ip to restore the default.
By default, the source IP address of flow logging packets is the IP address of the egress interface of the
packets.
Related commands: userlog flow export host.
Examples
# Configure the source IP address of flow logging packets as 1.2.1.2.
<Sysname> system-view
[Sysname] userlog flow export source-ip 1.2.1.2
userlog flow export version
Syntax
userlog flow export version version-number
undo userlog flow export version
View
System view
Default level
2: System level
Parameters
version-number: Specifies a flow logging version number. 1 or 3.
Description
Use userlog flow export version to configure the flow logging version.
Use undo userlog flow export version to restore the default.
The default flow logging version is 1.0.
If you configure the flow logging version multiple times, the last configuration take effect. Although a
device supports both of the two versions, only one can be active at one time.