R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

124
xmttime: 10:56:22.442 UTC Aug 7 2009(CE2686D6.71464DC2)
filter delay : 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter offset: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
filter disper: 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
reference clock status: working abnormally
timecode:
Total associations : 1
Table 28 Command output
Field Descri
p
tion
clock source IP address of the clock source
clock stratum
Stratum level of the clock source, which determines the clock precision. The
value ranges from 1 to 16. The clock precision decreases from stratum 1 to
stratum 16. A stratum 1 clock has the highest precision, and a stratum 16 clock
is not synchronized and cannot be used as a reference clock.
clock status
Status of the clock source corresponding to this session:
• configured—The session was created by a configuration command.
• dynamic—This session is established dynamically.
• master—The clock source is the primary reference source of the current
system.
• selected—The clock source has survived the clock selection algorithm.
• candidate—The clock source is the candidate reference source.
• sane—The clock source has passed the sane authentication.
• insane—The clock source has failed the sane authentication.
• valid—The clock source is valid, which means the clock source meet the
following requirements: it has passed the authentication and is being
synchronized; its stratum level is valid; its root delay and root dispersion
values are within their ranges.
• invalid—The clock source is invalid.
• unsynced—The clock source has not been synchronized or the value of the
stratum level is invalid.
reference clock ID
Reference clock ID of the clock source
1. If the reference clock is the local clock, the value of this field is related to
the stratum level of the clock source:
• When the stratum level of the clock source is 0 or 1, this field is "LOCL".
• When the stratum level of the clock source has another value, this field is the
IP address of the local clock.
2. If the reference clock is the clock of another device on the network, the
value of this field is the IP address of that device.
local mode
Operation mode of the local device:
• unspec—The mode is unspecified.
• active—Active mode.
• passive—Passive mode.
• client—Client mode.
• server—Server mode.
• bdcast—Broadcast server mode.
• control—Control query mode.
• private—Private message mode.