R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

132
Description
Use ntp-service broadcast-server to configure the device to operate in the NTP broadcast server mode
and use the current interface to send NTP broadcast packets.
Use undo ntp-service broadcast-server to remove the configuration.
By default, the device does not operate in any NTP operation mode.
Examples
# Configure the device to operate in broadcast server mode and send NTP broadcast messages on
GigabitEthernet 0/1, using key 4 for encryption, and set the NTP version to 3.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] ntp-service broadcast-server authentication-keyid 4 version
3
ntp-service in-interface disable
Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
Interface view
Default level
3: Manage level
Parameters
None
Description
Use ntp-service in-interface disable to disable an interface from receiving NTP messages.
Use undo ntp-service in-interface disable to restore the default.
By default, all interfaces are enabled to receive NTP messages.
Examples
# Disable interface GigabitEthernet 0/1 from receiving NTP messages.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/1
[Sysname-GigabitEthernet0/1] ntp-service in-interface disable
ntp-service max-dynamic-sessions
Syntax
ntp-service max-dynamic-sessions number
undo ntp-service max-dynamic-sessions
View
System view