R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

141
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rmon event to display the configuration of the specified or all RMON event entries.
Displayed information includes event index, event owner, event description, action triggered by the event
(such as sending log or trap messages), and last time the event occurred (the elapsed time since system
initialization/startup) in seconds.
Related commands: rmon event.
Examples
# Display the RMON event table.
<Sysname> display rmon event
EventEntry 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 32 Command output
Field Description
EventEntry Event entry, corresponding to the MIB node eventIndex.
owned by Event entry owner, corresponding to the MIB node eventOwner.
VALID
Entry status:
• VALID—The entry is valid.
• UNDERCREATION—The entry is invalid.
The display rmon command can display invalid entries, but the display
current-configuration and display this commands do not display their
settings.
Status value is stored in the MIB node eventStatus.
Description Event description, corresponding to the MIB node eventDescription.
cause log-trap when triggered
Actions that the system takes when the event is triggered:
• none—Takes no action.
• log—Logs the event.
• snmp-trap—Sends a trap to the NMS.
• log-and-trap—Logs the event and sends a trap to the NMS.
This field corresponds to the MIB node eventType.
last triggered at
Time when the last event was triggered, corresponding to the MIB node
eventLastTimeSent.
display rmon eventlog
Syntax
display rmon eventlog [ entry-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view