R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

156
SNMP configuration commands
IMPORTANT:
The FIPS mode is available only for the firewall modules. For more information about FIPS, see
Access
Control Configuration Guide
.
display snmp-agent community
Syntax
display snmp-agent community [ read | write ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
read: Displays information about SNMP read-only communities.
write: Displays information about SNMP read and write communities.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display snmp-agent community to display SNMPv1 and SNMPv2c community information.
In FIPS mode, this command is not available.
Examples
# Display information about all SNMPv1 and SNMPv2c communities.
<Sysname> display snmp-agent community
Community name: aa
Group name: aa
Acl:2001
Storage-type: nonVolatile
Community name: bb
Group name: bb
Storage-type: nonVolatile