R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

157
Community name: userv1
Group name: testv1
Storage-type: nonVolatile
Table 37 Command output
Field Descri
p
tion
Community name
Displays the community name created by using the snmp-agent community command or
the username created by using the snmp-agent usm-user { v1 | v2c } command.
Group name
SNMP group name:
• If the community is created by using the snmp-agent community command, the
group name is the same as the community name.
• If the community is created by using the snmp-agent usm-user { v1 | v2c } command,
the name of the group to which the user belongs is displayed.
Acl
Number of the ACL that controls the access of the NMSs in the community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access the device with
the community name.
Storage-type
Storage type:
• volatile—Settings are lost when the system reboots.
• nonVolatile—Settings remain after the system reboots.
• permanent—Settings remain after the system reboots and can be modified but not
deleted.
• readOnly—Settings remain after the system reboots and cannot be modified or
deleted.
• other—Any other storage type.
display snmp-agent group
Syntax
display snmp-agent group [ group-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Specifies the SNMP group name, a case-sensitive string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.