R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

176
location sys-location: A string of 1 to 200 characters that describes the location of the device. The system
location information is a management variable under the system branch as defined in RFC 1213-MIB,
identifying the location of the managed object.
version: The SNMP version in use.
• all: Specifies SNMPv1, SNMPv2c, and SNMPv3.
• v1: SNMPv1.
• v2c: SNMPv2c.
• v3: SNMPv3.
Description
Use snmp-agent sys-info to configure system information, for the SNMP agent, including the contact,
location, and SNMP versions.
Use undo snmp-agent sys-info contact and undo snmp-agent sys-info location to restore the default.
Use undo snmp-agent sys-info version to disable an SNMP version.
By default, the contact is null, the location information is null, and the version is SNMPv3.
Configure the SNMP agent with the same SNMP version as the NMS for successful communications
between them.
Related commands: display snmp-agent sys-info.
NOTE:
Network maintenance engineers can use the system contact information to get in touch with the
manufacturer in case of network failures. The system location information is a management variable
under the system branch as defined in RFC 1213-MIB, identifying the location of the managed object.
Examples
# Configure the contact information as Dial System Operator at beeper # 27345.
<Sysname> system-view
[Sysname] snmp-agent sys-info contact Dial System Operator at beeper # 27345
snmp-agent target-host
Syntax
In non-FIPS mode:
snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string [ v1 | v2c | v3
[ authentication | privacy ] ]
undo snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } params
securityname security-string [ vpn-instance vpn-instance-name ]
In FIPS mode:
snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
[ authentication | privacy ]
undo snmp-agent target-host trap a
ddress udp-domain { ip-address | ipv6 ipv6-address } params
securityname security-string [ vpn-instance vpn-instance-name ]