R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101
179
• iftxretransmit: Traps for the interface to receive and forward packets.
• lsdbapproachoverflow: Traps for LSDB to be overflowed.
• lsdboverflow: Traps for LSDB overflow.
• maxagelsa: Traps for LSA max age.
• nbrstatechange: Traps for neighbor state change.
• originatelsa: Traps for local LSA generation.
• vifcfgerror: Traps for virtual interface configuration error.
• virifauthfail: Traps for virtual interface authentication failure.
• virifrxbadpkt: Traps for virtual interface receiving error packets.
• virifstatechange: Traps for virtual interface state changes.
• viriftxretransmit: Traps for virtual interface receiving and forwarding packets.
• virnbrstatechange: Traps for neighbor state change of the virtual interface.
pim: Enables SNMP traps for the PIM module.
• candidatebsrwinelection: Traps for the winning of a candidate-bootstrap router (C-BSR) in
bootstrap router (BSR) election.
• electedbsrlostelection: Traps for the losing of the current BSR in BSR election.
• interfaceelection: Traps for the election of a new DR or DF on an interface.
• invalidjoinprune: Traps for receiving invalid join or prune packets.
• invalidregister: Traps for receiving invalid registration packets.
• neighborloss: Traps for the lost of a neighbor.
• rpmappingchange: Traps for the change of the current RP-set.
standard: Standard traps.
• authentication: Enables the sending of authentication failure traps in the event of authentication
failure.
• coldstart: Sends coldstart traps when the device restarts.
• linkdown: Sends linkdown traps when the port is in a linkdown status. It should be configured
globally.
• linkup: Sends linkup traps when the port is in a linkup status. It should be configured globally.
• wa
rmstart: Sends warmstart traps when the SNMP restarts.
system: Sends HP-SYS-MAN-MIB (a private MIB) traps.
vrrp: Enables traps for the VRRP module.
• authfailure: VRRP authentication failure traps.
• newmaster: VRRP newmaster traps, which are sent when the device becomes the master.
The following matrix shows the keyword and firewall compatibility:
Ke
y
word F1000-A-EI/S-EI
F1000-E
F5000
Firewall module
bfd No No Yes No
Description
Use snmp-agent trap enable to enable the trap function globally.