R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

190
SSH2.0 configuration commands
IMPORTANT:
The FIPS mode is available only for the firewall modules. For more information about FIPS, see
Access
Control Configuration Guide
.
SSH2.0 server configuration commands
display ssh server
Syntax
display ssh server { session | status } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
session: Displays the session information of the SSH server.
status: Displays the status information of the SSH server.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ssh server on an SSH server to display SSH server status information or session information.
This command is also available on an SFTP server.
Related commands: ssh server authentication-retries, ssh server authentication-timeout, ssh server
compatible-ssh1x enable, ssh server enable, and ssh server rekey-interval.
Examples
# Display the SSH server status information.
<Sysname> display ssh server status
SSH Server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)