R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

217
<Sysname> sftp 10.1.1.2 prefer-kex dh-group1 prefer-stoc-cipher aes128 prefer-ctos-hmac
md5 prefer-stoc-hmac sha1-96
Input Username:
sftp client ipv6 source
Syntax
sftp client ipv6 source { ipv6 ipv6-address | interface interface-type interface-number }
undo sftp client ipv6 source
View
System view
Default level
3: Manage level
Parameters
ipv6 ipv6-address: Specifies a source IPv6 address.
interface interface-type interface-number: Specifies a source interface by its type and number.
Description
Use sftp client ipv6 source to specify the source IPv6 address or source interface for an SFTP client.
Use undo sftp client ipv6 source to remove the configuration.
By default, an SFTP client uses the IPv6 address of the interface specified by the route of the device to
access the SFTP server.
Related commands: display sftp client source.
Examples
# Specify the source IPv6 address of the SFTP client as 2:2::2:2.
<Sysname> system-view
[Sysname] sftp client ipv6 source ipv6 2:2::2:2
sftp client source
Syntax
sftp client source { ip ip-address | interface interface-type interface-number }
undo sftp client source
View
System view
Default level
3: Manage level
Parameters
ip ip-address: Specifies a source IPv4 address.
interface interface-type interface-number: Specifies a source interface by its type and number.