R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

232
display ftp client configuration
Syntax
display ftp client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ftp client configuration to display the source IP address configuration of the FTP client.
This command displays the source IP address configuration of the FTP client. If the specified source IP
address is active, this command displays the source IP address. If the specified source interface is active,
this command displays the source interface.
Related commands: ftp client source.
Examples
# Display the source IP address configuration of the FTP client.
<Sysname> display ftp client configuration
The source IP address is 192.168.0.123
ftp
Syntax
ftp [ server-address [ service-port ] [ vpn-instance vpn-instance-name ] [ source { interface interface-type
interface-number | ip source-ip-address } ] ]
View
User view
Default level
3: Manage level
Parameters
server-address: IP address or host name (a string of 1 to 20 characters) of a remote FTP server.
service-port: TCP port number of the remote FTP server, in the range of 0 to 65535. The default value is
21.