R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

238
mkdir
Syntax
mkdir directory
View
FTP client view
Default level
3: Manage level
Parameters
directory: Name of the directory to be created.
Description
Use mkdir to create a subdirectory in the current directory on the remote FTP server.
You can do this only if you have permissions on the FTP server.
Examples
# Create subdirectory mytest on the current directory of the remote FTP server.
[ftp] mkdir mytest
257 "/mytest" new directory created.
open
Syntax
open server-address [ service-port ]
View
FTP client view
Default level
3: Manage level
Parameters
server-address: IP address or host name of a remote FTP server.
service-port: Port number of the remote FTP server, in the range of 0 to 65535. The default value is 21.
Description
Use open to log in to the IPv4 FTP server under FTP client view.
At login, enter the username and password for accessing the FTP server. If your input is correct, the login
succeeds.
If you have logged in to the IPv4 FTP server, you cannot use the open command to log in to another server.
To do so, you must disconnect from the current server first.
Related commands: close.
Examples
# In FTP client view, log in to the FTP server with the IP address of 192.168.1.50.
<Sysname> ftp
[ftp] open 192.168.1.50