R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

247
TFTP configuration commands
TFTP configuration commands are not supported in FIPS mode.
TFTP client configuration commands
display tftp client configuration
Syntax
display tftp client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display tftp client configuration to display source IP address configuration of the TFTP client.
This command displays the source IP address configuration of the TFTP client. If the specified source IP
address is active, this command displays the source IP address. If the specified source interface is active,
this command displays the source interface.
Related commands: tftp client source.
Examples
# Display the source IP address configuration of the TFTP client.
<Sysname> display tftp client configuration
The source IP address is 192.168.0.123
tftp-server acl
Syntax
tftp-server [ ipv6 ] acl acl-number
undo tftp-server [ ipv6 ] acl