R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

249
put: Uploads a file.
sget: Downloads a file in secure mode.
source-filename: Source file name.
destination-filename: Destination file name.
vpn-instance vpn-instance-name: Specifies the VPN where the TFTP server belongs. The
vpn-instance-name argument is a case sensitive string of 1 to 31 characters. If the TFTP server is on the
public network, do not specify this option.
source: Configures parameters for source address binding.
• interface interface-type interface-number: Specifies the source interface by its type and number. The
primary IP address configured on the source interface is the source IP address of the packets sent by
TFTP. If no primary IP address is configured on the source interface, the transmission fails.
• ip source-ip-address: Specifies the source IP address for the current TFTP client to transmit packets.
This source address must be an IP address that has been configured on the firewall.
Description
Use tftp to upload files from the local device to a TFTP server or download files from the TFTP server to the
local device.
If no destination file name is specified, the saved file uses the source file name.
This command applies to IPv4 networks.
Examples
# Download the config.cfg file from the TFTP server with the IP address of 192.168.0.98 and save it as
config.bak. Specify the source IP address to be 192.168.0.92.
<Sysname> tftp 192.168.0.98 get config.cfg config.bak source ip 192.168.0.92
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 372800 bytes received in 1 second(s)
File downloaded successfully.
# Upload the config.cfg file from the local device to the default path of the TFTP server with the IP address
of 192.168.0.98 and save it as config.bak. Specify the source IP interface to be GigabitEthernet 0/1.
<Sysname> tftp 192.168.0.98 put config.cfg config.bak source interface gigabitethernet
0/1
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait...
TFTP: 345600 bytes sent in 1 second(s).
File uploaded successfully.
tftp client source
Syntax
tftp client source { interface interface-type interface-number | ip source-ip-address }
undo tftp client source