R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

39
Table 11 Command output
Field Descri
p
tion
No Serial number of the bad blocks
Physical block Serial number of the physical pages with bad blocks
3200 block(s) total, 3 block(s) bad. Total number of blocks and bad blocks in the NAND flash memory
display nandflash page-data
Syntax
display nandflash page-data page-value [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
page-value: Serial number of a physical page.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display nandflash page-data to display the data on the specified physical page in the NAND flash
memory.
This command is always used in combination with the display nandflash file-location command to check
the correctness of the data in the NAND flash memory.
The following matrix shows the command and firewall compatibility:
Command F1000-A-EI/S-EI F1000-E F5000 Firewall module
display nandflash page-data Yes No No No
Examples
# Display the content of the file test.cfg which is saved in the NAND flash memory.
<Sysname> display nandflash file-location test.cfg
Logical Chunk Physical Page
---------------------------
chunk(0) 1234
chunk(1) 1236
chunk(2) 1235