R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

57
<Sysname> display patch information
The location of patches: flash0:
Slot Version Temporary Common Current Active Running Start-Address
----------------------------------------------------------------------
0 HFW004 0 1 1 0 1 0x310bd74
Table 13 Command output
Field Descri
p
tion
The location of patches Patch file location.
Slot Meaningless.
Version
Patch version. The following three digits, if any, represent the patch number.
(The patch number can be read after the patch is loaded.)
Temporary Number of temporary patches.
Common Number of common patches.
Current Total number of patches.
Running Number of patches in the RUNNING state.
Active Number of patches in the ACTIVE state.
Start-Address Starting address of the memory patch area in the memory.
patch active
Syntax
patch active [ patch-number ]
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch.
Description
Use patch active to activate patches. The system will temporarily run the loaded patches.
If you execute the command with specifying the sequence number of a patch, all the DEACTIVE patches
(including the specified patch) before the specified patch will be activated.
If you execute the command without specifying the sequence number of a patch, all the DEACTIVE
patches will be activated.
NOTE:
• The command is applicable to only patches in the DEACTIVE state.
• After a system reboot, the original ACTIVE patches change to DEACTIVE and become invalid. To make
them effective, activate them again.