R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

58
Examples
# Activate patch 3 and all the loaded DEACTIVE patches before patch 3.
<Sysname> system-view
[Sysname] patch active 3
# Activate all the loaded patches.
<Sysname> system-view
[Sysname] patch active
patch deactive
Syntax
patch deactive [ patch-number ]
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch.
Description
Use patch deactive to stop running patches and the system will run at the original software version.
If you execute the command with specifying the sequence number of a patch, all the ACTIVE patches
(including the specified patch) after the specified patch turn to the DEACTIVE state.
If you execute the command without specifying the sequence number of a patch, all the ACTIVE patches
turn to the DEACTIVE state.
This command is not applicable to the patches in the RUNNING state.
Examples
# Stop running patch 3 and all the ACTIVE patches after patch 3.
<Sysname> system-view
[Sysname] patch deactive 3
# Stop running all the ACTIVE patches.
<Sysname> system-view
[Sysname] patch deactive
patch delete
Syntax
patch delete [ patch-number ]
View
System view
Default level
3: Manage level