R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

61
patch location
Syntax
patch location patch-location
View
System view
Default level
3: Manage level
Parameters
patch-location: Specifies the patch file location, a string of 1 to 64 characters.
Description
Use patch location to configure the patch file location.
By default, the patch file location is flash:.
The patch files must be saved in the root directory of a storage medium. If the patch files reside on a
storage medium other than the Flash, use this command to specify the path information so the system can
locate the patch files. If the device has only one storage medium, the location of patch files is definite and
you do not need to execute this command.
Executing the patch install command changes the patch file location specified with this command.
To install a patch package, you do not need to configure this command.
Examples
# Configure the root directory of the CF card as the patch file location.
<Sysname> system-view
[Sysname] patch location cf:
patch run
Syntax
patch run [ patch-number ]
View
System view
Default level
3: Manage level
Parameters
patch-number: Sequence number of a patch.
Description
Use patch run to confirm the running of ACTIVE patches.
If you execute the command with specifying the sequence number of a patch, the command confirms the
running of all the ACTIVE patches (including the specified patch) before the specified patch.
If you execute the command without specifying the sequence number of a patch, the command confirms
the running of all the ACTIVE patches.