R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Command Reference-6PW101

91
[Sysname-GigabitEthernet0/1] undo enable log updown
info-center channel name
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel name, which is a string of 1 to 30 characters. It must be a
combination of letters and numbers, and start with a letter and is case-insensitive.
Description
Use info-center channel name to name a channel.
Use undo info-center channel to command to restore the default name for a channel.
See Table 16
for information about default channel names and channel numbers.
Examples
# Name channel 0 as abc.
<Sysname> system-view
[Sysname] info-center channel 0 name abc
info-center console channel
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to
configure a channel name, see info-center channel name.
Description
Use info-center console channel to specify the console output channel. The system uses this channel to
output information to the console.