R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

92
Field Descri
p
tion
Flow Information
Flow information.
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1. 2 :10 26 - - > 1.1. 2.10 : 6 9.
• If the protocol type is ICMP, the displayed flow information is source IP
address-->destination IP address,ICMP type (ICMP code), for example,
1.1.1. 2- - > 1.1. 2.10 , e c h o ( 8 ) .
• If the protocol type is another type except these three, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1. 2- - > 1.1. 2.10 .
Displaying user logs
NOTE:
To display user logs through the web interface, configure outputting user logs to the information center.
Select Log Report > Report > Userlog from the navigation tree to enter the page for displaying user logs.
If you select the 1.0 option, the user logging 1.0 information will be displayed, as shown in Figure 41; if
yo
u select the 3.0 option, the user logging 3.0 information will be displayed, as shown in Figure 42.
Figure 41 User logging 1.0 log report