R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

124
Task Command Remarks
Display log information for event
entries.
display rmon eventlog [ entry-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any
view
Ethernet statistics group configuration example
Network requirements
Configure the RMON statistics group on the RMON agent in Figure 57 to gather cumulative traffic
statistics for GigabitEthernet 0/1.
Figure 57 Network diagram
Configuration procedure
# Configure the RMON statistics group on the RMON agent to gather statistics for GigabitEthernet 0/1.
<Firewall> system-view
[Firewall] interface gigabitethernet 0/1
[Firewall-GigabitEthernet0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 0/1.
<Firewall> display rmon statistics gigabitethernet 0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet0/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)
History group configuration example
Network requirements
Configure the RMON history group on the RMON agent in Figure 58 to gather periodical traffic statistics
for GigabitEthernet 0/1 every one minute.