R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

136
Ste
p
Command Remarks
2. Configure
target host.
snmp-agent target-host trap
address udp-domain { ip-address |
ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance
vpn-instance-name ] params
securityname security-string [ v1 |
v2c | v3 [ authentication |
privacy ] ]
Optional.
The vpn-instance keyword is applicable in an
IPv4 network.
To send the traps to the NMS, this command is
required, and you must specify ip-address as the
IP address of the NMS.
3. Configure the
source address
for traps.
snmp-agent trap source
interface-type { interface-number |
interface-number.subnumber }
Optional.
4. Extend the
standard
linkUp/linkDo
wn traps.
snmp-agent trap if-mib link
extended
Optional.
By default, standard linkUp/linkDown traps are
used.
Extended linkUp/linkDown traps add interface
description and interface type to standard
linkUp/linkDown traps. If the NMS does not
support extended SNMP messages, use
standard linkUp/linkDown traps.
5. Configure the
trap queue
size.
snmp-agent trap queue-size size
Optional.
The default trap queue size is 100.
When the trap queue is full, the oldest traps are
automatically deleted for new traps.
6. Configure the
trap holding
time.
snmp-agent trap life seconds
Optional.
The default setting is 120 seconds.
A trap is deleted when its holding time expires.
Displaying and maintaining SNMP
Task Command Remarks
Display SNMP agent system
information, including the contact,
physical location, and SNMP
version.
display snmp-agent sys-info [ contact |
location | version ]* [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display SNMP agent statistics.
display snmp-agent statistics [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display the local engine ID.
display snmp-agent local-engineid [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display SNMP group information.
display snmp-agent group [ group-name ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display basic information about
the trap queue.
display snmp-agent trap queue [ | { begin |
exclude | include } regular-expression ]
Available in any view