R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

158
Configuration procedure
NOTE:
During SSH server configuration, the client public key is required. Use the client software to
g
enerate RS
A
key pairs on the client before configuring the SSH server.
1. Configure the SSH client
# Generate the RSA key pairs.
Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 75 Generating a key pair on the client
When the generator is generating the key pair, you must move the mouse continuously and keep
the mouse off the green process bar shown in Figure 76. Otherwi
se, the process bar stops moving
and the key pair generating process will be stopped.