R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

177
# Configure a local user named client002 with the password being aabbcc and the service type
being SSH.
[Firewall] local-user client002
[Firewall-luser-client002] password simple aabbcc
[Firewall-luser-client002] service-type ssh
[Firewall-luser-client002] quit
# Configure the user authentication method as password and service type as SFTP.
[Firewall] ssh user client002 service-type sftp authentication-type password
2. Establish a connection between the SFTP client and the SFTP server.
NOTE:
• The device supports a variety of SSH client software. The following takes the PSFTP of PuTTY Version 0.58
as an example.
• The PSFTP supports only password authentication.
# Establish a connection to the remote SFTP server.
Run the psftp.exe to launch the client interface as shown in Figure 84, and enter the following
command:
open 192.168.1.45
Enter username client002 and password aabbcc as prompted to log in to the SFTP server.
Figure 84 SFTP client interface