R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

45
2. Click Restore.
Figure 22 Restoring configuration
3. Click the upper or lower Browse button to select the .cfg or .xml configuration file.
4. Click Apply.
Resetting the configuration
This operation restores the system to the factory defaults, delete the running configuration file, and reboot
the device.
To reset the configuration:
1. Select Device Management > Maintenance from the navigation tree, and then click the Initialize
tab to enter the initialize confirmation page.
Figure 23 Resetting the configuration
2. Click the Restore Factory-Default Settings button to restore the system to factory defaults.
Importing a configuration file
This operation allows you to import a .cfg file from your host to the device and execute the configuration
in the file. The imported configuration takes effect immediately, but is not automatically saved to the
configuration file to be used at the next startup. You must manually save the configuration.
The device does not support importing an encrypted configuration file.