R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

56
Outputting system information by source module
The system is composed of a variety of protocol modules, board drivers, and configuration modules.
System information can be classified, filtered, and output according to source modules. You can use the
info-center source ? command to view the supported information source modules.
Default output rules of system information
A default output rule specifies the system information source modules, information type, and severity
levels for an output destination. Table 8 sho
ws the default output rules. The following describes default
settings:
• All log information is output to the Web interface and log file. Log information with a severity level
equal to or higher than informational is output to the log host. Log information with a severity level
equal to or higher than informational is output to the console, monitor terminal, and log buffer. Log
information is not output to the trap buffer and the SNMP module.
• All trap information is output to the console, monitor terminal, log host, Web interface, and log file.
Trap information with a severity level equal to or higher than informational is output to the trap
buffer and SNMP module. Trap information is not output to the log buffer.
• All debugging information is output to the console and monitor terminal. Debugging information is
not output to the log host, trap buffer, log buffer, the SNMP module, Web interface, and log file.
Table 8 Default output rules
Output
destination
Modules
allowed
LOG TRAP
DEBUG
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Enabled/
disabled
Severity
Console
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Monitor
terminal
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Enabled Debug
Log host
default (all
modules)
Enabled
Informatio
nal
Enabled Debug Disabled Debug
Trap buffer
default (all
modules)
Disabled
Informatio
nal
Enabled
Informatio
nal
Disabled Debug
Log buffer
default (all
modules)
Enabled
Informatio
nal
Disabled Debug Disabled Debug
SNMP
module
default (all
modules)
Disabled Debug Enabled
Informatio
nal
Disabled Debug
Web
interface
default (all
modules)
Enabled Debug Enabled Debug Disabled Debug
Log file
default (all
modules)
Enabled Debug Enabled Debug Disabled Debug
System information format
The following shows the original format of system information, which may be different from what you see.
The actual system information format depends on the log resolution tool you use.