R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

60
Task Remarks
Outputting system information to the trap buffer Optional
Outputting system information to the log buffer Optional
Outputting system information to the SNMP module Optional
Outputting system information to the Web interface Optional
Saving system information to the log file Optional
Saving security logs into the security log file Optional
Configuring synchronous information output Optional
Disabling a port from generating link up/down logging information Optional
Outputting system information to the console
This section describes how to output system information to the console.
Configuring a system information output rule for the console
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the information center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See Table 7 for default channel
names.
4. Configure the channel
through which system
information can be output to
the console.
info-center console channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (known as console).
5. Configure a system
information output rule for the
console.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "Default output rules of system
information."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
The time stamp format for log, trap
and debugging information is date
by default.
Enabling the display of system information on the console
To enable the display of system information on the console in user view: