R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

61
Ste
p
Command Remarks
1. Enable the
monitoring of system
information on the
console.
terminal monitor
Optional.
Enabled on the console and
disabled on the monitor
terminal by default.
2. Enable the display of
system information
on the console.
• Enable the display of debugging information
on the console:
terminal debugging
• Enable the display of log information on the
console:
terminal logging
• Enable the display of trap information on the
console:
terminal trapping
Optional.
By default, the console only
displays log and trap
information.
Outputting system information to the monitor
terminal
Monitor terminals refer to terminals that log in to the device through the VTY user interface.
Configuring a system information output rule for the monitor
terminal
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Enable the information
center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with
a specified channel
number.
info-center channel channel-number
name channel-name
Optional.
See Table 7 for default channel
names.
4. Configure the channel
through which system
information can be
output to a monitor
terminal.
info-center monitor channel
{ channel-number | channel-name }
Optional.
By default, system information is output
to the monitor terminal through channel
1 (known as monitor).
5. Configure a system
information output rule
for the monitor terminal.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap { level
severity | state state } * ] *
Optional.
See "Default output rules of system
informa
tion."
6. Configure the timestamp
format.
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional.
By default, the time stamp format for
log, trap and debugging information is
date.