R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

79
Field Descri
p
tion
StartTime Start time of a flow, in seconds, counted from 1970/1/1 0:0.
EndTime End time of a flow, in seconds, counted from 1970/1/1 0:0.
Prot Protocol carried over IP.
Operator Indicates the reason why a flow has ended.
Reserved For future applications.
Table 13 Packet format in user logging version 3.0
Field Descri
p
tion
Prot Protocol carried over IP.
Operator Indicates the reason why a flow has ended.
IpVersion IP packet version.
TosIPv4 ToS field of the IPv4 packet.
SourceIP Source IP address.
SrcNatIP Source IP address after Network Address Translation (NAT) .
DestIP Destination IP address.
DestNatIP Destination IP address after NAT.
SrcPort TCP/UDP source port number.
SrcNatPort TCP/UDP source port number after NAT.
DestPort TCP/UDP destination port number.
DestNatPort TCP/UDP destination port number after NAT.
StartTime Start time of a flow, in seconds, counted from 1970/01/01 00:00.
EndTime End time of a flow, in seconds, counted from 1970/01/01 00:00.
InTotalPkg Number of packets received.
InTotalByte Number of bytes received.
OutTotalPkg Number of packets sent.
OutTotalByte Number of the bytes sent.
Reserved1
• Reserved in version 0x02 (FirewallV200R001).
• In version 0x03 (FirewallV200R005), the first byte is the source VPN ID, the second
byte is the destination VPN ID, and the third and forth bytes are reserved.
Reserved2 For future applications.
Reserved3 For future applications.
Configuring user logging in the web interface
Configuring user logging
Select Log Report > Userlog from the navigation tree to enter the page as shown in Figure 30.