R3721-F3210-F3171-HP High-End Firewalls System Management and Maintenance Configuration Guide-6PW101

81
Item Descri
p
tion
Log Host
Configura
tion
Log Host 1 Set the IPv4/IPv6 addresses, port number, and the VPN instance of the log hosts.
You can specify up to two log hosts. User logs are sent to the specified log hosts in UDP
packets.
IMPORTANT:
To avoid collision with the common UDP port numbers, use a UDP port number in the
range 1025 to 65535.
Log Host 2
Output userlog to
information center
Set to output user logs to the information center in the format of system information.
IMPORTANT:
• With this function enabled, user logs will not be output to the specified userlog
log host.
• Outputting user logs to the information center occupies the storage space of the
device. Output user logs to the information center when there are a small amount
of user logs.
Displaying user logging statistics
If you set to send user logs in UDP packets to the specified userlog log host, you can view the related
statistics, including the total number of user logs sent to the log host, the total number of UDP packets, and
the total number of user logs stored on the device cache.
If you click Statistics on the Userlog page, you can view the information as shown in Figure 31.
T
o clear all user logging statistics of the device and the user logs in the cache, click Reset.
Figure 31 Viewing user logging statistics
Configuring user logging at the CLI
User logging configuration task list
Complete the following tasks to configure user logging:
Task Remarks
Configuring user logging version Optional.
Configuring the source address for user logging packets Optional.
Exporting user logs
Exporting user logs to a log server
Use either appr
oach.
Exporting user logs to the information center