R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

114
View
Virtual template interface view
Default level
2: System level
Parameters
None
Description
Use l2tp-auto-client enable to trigger an LAC to establish an L2TP tunnel.
Use undo l2tp-auto-client enable to remove the established L2TP tunnel.
By default, an LAC does not establish an L2TP tunnel.
Examples
# Trigger the LAC to establish an L2TP tunnel.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] l2tp-auto-client enable
l2tp-group
Syntax
l2tp-group group-number
undo l2tp-group group-number
View
System view
Default level
2: System level
Parameters
group-number: Number for identifying the L2TP group, in the range of 1 to 1000.
Description
Use l2tp-group to create an L2TP group and enter its view.
Use undo l2tp-group to remove an L2TP group.
By default, no L2TP group exists.
When you use the undo l2tp-group command to remove an L2TP group, all configuration information
associated with the group will be deleted.
Related commands: allow l2tp and start l2tp.
Examples
# Create an L2TP group numbered 2 and enter its view.
<Sysname> system-view
[Sysname] l2tp-group 2
[Sysname-l2tp2]