R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

158
SSL VPN configuration commands
The following matrix shows the feature and firewall compatibility:
Feature F1000-A-EI/S-EI F1000-E F5000 Firewall module
SSL VPN Yes Yes No No
ssl-vpn enable
Syntax
ssl-vpn enable
undo ssl-vpn enable
View
System view
Default level
2: System level
Parameters
None
Description
Use ssl-vpn enable to enable the SSL VPN service.
Use undo ssl-vpn enable to disable the SSL VPN service.
By default, the SSL VPN service is disabled.
Before executing this command, make sure that an SSL server policy has been specified for the SSL VPN
service by using the ssl-vpn server-policy command.
Related commands: ssl-vpn server-policy.
Examples
# Specify the SSL server policy svpn and port 3001 for the SSL VPN service, and then enable the SSL VPN
service.
<Sysname> system-view
[Sysname] ssl server-policy svpn
[Sysname-ssl-server-policy-svpn] pki-domain domain1
[Sysname-ssl-server-policy-svpn] quit
[Sysname] ssl-vpn server-policy svpn port 3001
[Sysname] ssl-vpn enable
ssl-vpn server-policy
Syntax
ssl-vpn server-policy server-policy-name [ port port-number ]