R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

171
Description
Use client enable to enable the VAM client feature for a VAM client.
Use undo client enable to restore the default.
By default, the VAM client feature is disabled.
Related commands: vam client enable and vam client name.
Examples
# Enable the VAM client feature for VAM client spoke.
<Sysname> system-view
[Sysname] vam client name spoke
[Sysname-vam-client-name-spoke] client enable
display vam client
Syntax
display vam client { address-map | fsm } [ client-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
address-map: Specifies the address mapping information between public and private network
addresses of VAM clients.
fsm: Specifies the status information of VAM clients.
client-name: VAM client name, a case-insensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display vam client to display registration information about VAM clients, which is received from the
server.
• With the client-name argument specified, the command displays the registration information of the
specified VAM client.
• Without the client-name argument, the command displays the address mapping information about
the other Spokes and the Hubs on a Spoke and displays that about the other Hubs on a Hub.
• As for the arguments not specified, or the information not obtained dynamically, the corresponding
information will not be displayed.