R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

179
Description
Use display dvpn session to display information about DVPN sessions.
Related commands: reset dvpn session.
Examples
# Display information about DVPN sessions of interface Tunnel 0.
<Sysname> display dvpn session interface tunnel 0
Interface: Tunnel0 Total number: 2
Private IP: 10.0.0.21
Public IP: 28.1.1.21
Tunnel type: Hub-Spoke
State: SUCCESS
Holding time: 0h 15m 33s
Input: 277 packets, 66 data packets, 211 control packets
58 multicasts, 0 errors
Output: 279 packets, 103 data packets, 176 control packets
93 multicasts, 0 errors
Private IP: 10.0.0.22
Public IP: 28.1.1.22
Tunnel type: Hub-Spoke
State: SUCCESS
Holding time: 0h 44m 9s
Input: 279 packets, 100 data packets, 179 control packets
91 multicasts, 0 errors
Output: 273 packets, 99 data packets, 174 control packets
91 multicasts, 0 errors
Table 37 Command output
Field Description
Interface DVPN tunnel interface
Total number Number of DVPN tunnels established on the tunnel interface
Private IP Private address of the DVPN session peer
Public IP Public address of the DVPN session peer
Tunnel type Tunnel type of the DVPN session
State
Status of the DVPN tunnel, which can be SUCCESS, ESTABLISH, or DUMB.
• SUCCESS—The tunnel is already established.
• ESTABLISH—The tunnel is being established.
• DUMB—The tunnel failed to be established and is now quiet.
Holding time Length of time that the tunnel is in the current state
Input
Statistics about inbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.
Output
Statistics about outbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.