R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

29
Examples
# Set the MTU for IPv4 packets on interface Tunnel 3 to 10000 bytes.
<Sysname> system-view
[Sysname] interface tunnel 3
[Sysname-Tunnel3] mtu 10000
reset counters interface
Syntax
reset counters interface [ tunnel [ number ] ]
View
User view
Default level
2: System level
Parameters
number: Tunnel interface number.
Description
Use reset counters interface to clear the statistics of tunnel interfaces.
Before sampling network traffic within a specific period of time on an interface, you need to clear the
existing statistics.
• If neither the tunnel keyword nor interface number is specified, this command clears the statistics of
all interfaces.
• If only the tunnel keyword is specified, this command clears the statistics of all tunnel interfaces.
• If both the tunnel keyword and interface number are specified, this command clears the statistics of
the specified tunnel interface.
Examples
# Clear the statistics of Tunnel 3.
<Sysname> reset counters interface tunnel 3
shutdown
Syntax
shutdown
undo shutdown
View
Tunnel interface view
Default level
2: System level
Parameters
None