R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

31
Or
<Sysname> system-view
[Sysname] interface tunnel 5
[Sysname-Tunnel5] source GigabitEthernet 0/1
tunnel bandwidth
Syntax
tunnel bandwidth bandwidth-value
undo tunnel bandwidth
View
Tunnel interface view
Default level
2: System level
Parameters
bandwidth-value: Bandwidth value of the tunnel interface in kbps, in the range of 1 to 10000000.
Description
Use tunnel bandwidth to set the bandwidth of the tunnel interface.
Use undo tunnel bandwidth to restore the default.
By default, the bandwidth of the tunnel interface is 64 kbps.
The tunnel interface bandwidth set with the tunnel bandwidth command is for dynamical routing
protocols to calculate the cost of a tunnel path, rather than changes the bandwidth of the tunnel interface.
Refer to the bandwidth of the output interface of the packet when you set the bandwidth of the tunnel
interface.
Examples
# Configure the bandwidth of Tunnel 0 as 100 kbps.
<Sysname> system-view
[Sysname] interface tunnel 0
[Sysname-Tunnel0] tunnel bandwidth 100
tunnel discard ipv4-compatible-packet
Syntax
tunnel discard ipv4-compatible-packet
undo tunnel discard ipv4-compatible-packet
View
System view
Default level
2: System level
Parameters
None