R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

38
Description
Use display ike peer to display information about IKE peers.
If you do not specify any parameters, the command displays information about all IKE peers.
Related commands: ike peer.
Examples
# Display information about all IKE peers.
<Sysname> display ike peer
---------------------------
IKE Peer: rtb4tunn
exchange mode: main on phase 1
pre-shared-key simple 123
peer id type: ip
peer ip address: 44.44.44.55
local ip address:
peer name:
nat traversal: disable
dpd: dpd1
---------------------------
Table 11 Command output
Field Descri
p
tion
exchange mode IKE negotiation mode in phase 1
pre-shared-key Pre-shared key used in phase 1
peer id type ID type used in phase 1
peer ip address IP address of the remote security gateway
local ip address IP address of the local security gateway
peer name Name of the remote security gateway
nat traversal Whether NAT traversal is enabled
dpd Name of the peer DPD detector
display ike proposal
Syntax
display ike proposal [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level