R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

53
[Sysname] ike peer xhy
[Sysname-ike-peer-xhy] local-address 1.1.1.1
local-name
Syntax
local-name name
undo local-name
View
IKE peer view
Default level
2: System level
Parameters
name: Name for the local security gateway to be used in IKE negotiation, a case-sensitive string of 1 to
32 characters.
Description
Use ike local-name to configure a name for the local security gateway to be used in IKE negation.
Use undo local-name to restore the default.
By default, the device name is used as the name of the local security gateway view.
If you configure the id-type name or id-type user-fqdn command on the initiator, the IKE negotiation peer
uses the security gateway name as its ID to initiate IKE negotiation, and you must configure the ike
local-name command in system view or the local-name command in IKE peer view on the local device.
If you configure both the ike local-name command and the local-name command, the name configured
by the local-name command is used.
The IKE negotiation initiator sends its security gateway name as its ID to the peer, and the peer uses the
security gateway name configured with the remote-name command to authenticate the initiator. Make
sure the local gateway name matches the remote gateway name configured on the peer.
Relate commands: remote-name, id-type.
Examples
# Set the name of the local security gateway to localgw in IKE peer view of peer1.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] local-name localgw
nat traversal
Syntax
nat traversal
undo nat traversal
View
IKE peer view