R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

62
connection-name
Syntax
connection-name name
undo connection-name
View
IPsec policy view, IPsec policy template view
Default level
2: System level
Parameters
name: IPsec connection name, a case-insensitive string of 1 to 32 characters.
Description
Use connection-name to configure an IPsec connection name. This name functions only as a description
of the IPsec policy.
Use undo connection-name to restore the default.
By default, no IPsec connection name is configured.
Example
# Set IPsec connection name to CenterToA.
<Sysname> system-view
[Sysname] ipsec policy policy1 1 isakmp
[Sysname-ipsec-policy-isakmp-policy1-1] connection-name CenterToA
cryptoengine enable
Syntax
cryptoengine enable
undo cryptoengine enable
View
System view
Default level
2: System level
Parameters
None
Description
Use cryptoengine enable to enable the encryption engine.
Use undo cryptoengine enable to disable the encryption engine.
By default, the encryption engine is enabled.
Examples
# Enable the encryption engine.