R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

63
<Sysname> system-view
[Sysname] cryptoengine enable
display ipsec policy
Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specified IPsec policy or IPsec policy group.
policy-name: Name of the IPsec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPsec policy, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ipsec policy to display information about IPsec policies.
If you do not specify any parameters, the command displays detailed information about all IPsec
policies.
If you specify the name policy-name option but leave the seq-number argument, the command displays
detailed information about the specified IPsec policy group.
Related commands: ipsec policy (system view).
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name Mode acl ike-peer name Mapped Template
------------------------------------------------------------------------
bbbbbbbbbbbbbbb-1 template aaaaaaaaaaaaaaa
man-1 manual 3400
map-1 isakmp 3000 peer
nat-1 isakmp 3500 nat
test-1 isakmp 3200 test