R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

76
input/output security packets: 5124/8231
input/output security bytes: 52348/64356
input/output dropped security packets: 0/0
dropped security packet detail:
not enough memory: 0
queue is full: 0
authentication has failed: 0
wrong length: 0
replay packet: 0
packet too long: 0
wrong SA: 0
Table 23 Command output
Field Description
Connection ID ID of the tunnel
input/output security packets Counts of inbound and outbound IPsec protected packets
input/output security bytes Counts of inbound and outbound IPsec protected bytes
input/output dropped security packets
Counts of inbound and outbound IPsec protected packets that are
discarded by the device
dropped security packet detail
Detailed information about inbound/outbound packets that get
dropped
not enough memory Number of packets dropped due to lack of memory
can't find SA Number of packets dropped due to finding no security association
queue is full Number of packets dropped due to full queues
authentication has failed Number of packets dropped due to authentication failure
wrong length Number of packets dropped due to wrong packet length
replay packet Number of packets replayed
packet too long Number of packets dropped due to excessive packet length
wrong SA Number of packets dropped due to improper SA
display ipsec tunnel
Syntax
display ipsec tunnel [ active | standby ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
active: Displays information about active IPsec tunnels in an IPsec stateful failover scenario.
standby: Displays information about standby IPsec tunnels in an IPsec stateful failover scenario.