R3721-F3210-F3171-HP High-End Firewalls VPN Command Reference-6PW101

84
View
Interface view
Default level
2: System level
Parameters
policy-name: Name of the existing IPsec policy group to be applied to the interface, a string of 1 to 15
characters.
Description
Use ipsec policy to apply an IPsec policy group to an interface.
Use undo ipsec policy to remove the application.
Only one IPsec policy group can be applied to an interface. To apply another IPsec policy group to the
interface, remove the original application first. An IPsec policy group can be applied to more than one
interface.
With an IPsec policy group applied to an interface, the system uses each IPsec policy in the group to
protect certain data flows.
For each packet to be sent out an IPsec protected interface, the system checks the IPsec policies of the
IPsec policy group in the ascending order of sequence numbers. If it finds an IPsec policy whose ACL
matches the packet, it uses the IPsec policy to protect the packet. If it finds no ACL of the IPsec policies
matches the packet, it does not provide IPsec protection for the packet and sends the packet out directly.
Related commands: ipsec policy (system view).
Examples
# Apply IPsec policy group pg1 to interface GigabitEthernet 0/2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 0/2
[Sysname-GigabitEthernet0/2] ipsec policy pg1
ipsec policy (system view)
Syntax
ipsec policy policy-name seq-number [ isakmp | manual ]
undo ipsec policy policy-name [ seq-number ]
View
System view
Default level
2: System level
Parameters
policy-name: Name for the IPsec policy, a case-insensitive string of 1 to 15 characters. No minus sign (-)
can be included.
seq-number: Sequence number for the IPsec policy, in the range of 1 to 65535.
isakmp: Sets up SAs through IKE negotiation.