R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

189
# Configure an IPsec proposal named tran1, and configure the proposal as follows.
Select VPN > IPSec > Proposal from the navigation tree, click Add, select Custom mode from the IPSec
Proposal Configuration Wizard page, and perform the configurations shown in Figure 123.
Figure 123 Configure IPs
ec proposal tran1
• Enter tran1 as the name of the IPsec proposal.
• Select Tunnel as the packet encapsulation mode.
• Select ESP as the security protocol.
• Select SHA1 as the ESP authentication algorithm.
• Select DES as the ESP encryption algorithm.
• Click Apply.
# Configure the IKE peer.
Select VPN > IKE > Peer from the navigation tree and then click Add to enter the IKE peer configuration
page. Perform the configurations shown in Figure 124.