R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

191
Figure 125 Configure an IPsec policy
• Enter map1 as the policy name.
• Enter 10 as the sequence number.
• Select the IKE peer of peer.
• Select the IPsec proposal of tran1 and click <<.
• Enter 3101 as the ACL.
• Select Enable for RRI.
• Enter 2.2.2.2 as the next hop.
• Click Apply.
# Apply the IPsec policy to interface GigabitEthernet 0/1.
Select VPN > IPSec > IPSec Application from the navigation tree, and then click the icon of interface
GigabitEthernet 0/1 to enter the IPsec application page. Perform the configurations shown in Figure 126.