R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

236
Configuring L2TP in the Web interface
NOTE:
• Only the LNS configuration is available in the web interface.
• When an L2TP user group is created, the firewall automatically creates a VT interface with the same
number as the user group. If a VT interface with the same number already exists, it is overwritten by the
newly created VT interface.
L2TP configuration task list
Task Remarks
Enabling L2TP
Required.
By default, L2TP is disabled.
Adding an L2TP group
Required.
Create a L2TP group and configure L2TP group related
parameters.
By default, no L2TP group is created.
Displaying L2TP tunnel information
Optional.
View the L2TP tunnel information.
Enabling L2TP
Select VPN > L2TP > L2TP Config from the navigation tree to enter the L2TP configuration page, as shown
in Figure 154. On the upper par
t of the page, you can enable or disable L2TP.
Figure 154 L2TP configuration page
Table 22 Configuration item
Item Descri
p
tion
Enable L2TP Specify whether to enable L2TP globally.