R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

245
• Select PPP as the user type.
• Enter password Hello.
• Enter Hello to confirm the password.
• Click Apply.
# Enable L2TP.
• Select VPN > L2TP > L2TP Config from the navigation tree. Then, perform the configurations shown
in Figure 161.
Figure 161 Enabling L2TP
• Select the Enable L2TP box.
• Click Apply.
# Add an L2TP group
• On the L2TP configuration page, click Add and then perform the following configurations.
• Enter the L2TP group name test.
• Enter the peer tunnel name vpdnuser.
• Enter the local tunnel name LNS.
• Select Disable for Tunnel Authentication.
• Select CHAP as the PPP authentication method.
• Select ISP domain system (the default ISP domain).
• Click the Modify button of the ISP domain to perform the configurations shown in Figure 162.