R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

337
Item Descri
p
tion
Single login
Select the box to enable single login.
After you enable single login and configure single login parameters, when a user
access the resource through the SSL VPN service interface, the user can
automatically log in to the specified website if the user's username and password
for accessing the website are the same as those for logging in to the SSL VPN
service interface.
After you enable single login, you can configure the subsequent items.
IMPORTANT:
Another way to configure the single login function is as follows:
• Click the icon of a resource on the web proxy server resource list, as
shown in Figure 217.
• Enter a username and a password (the password must be different from the
username) on the popup page, and click Apply. Then, the login page for the
website in the resource pops up.
• Enter the username and password again and log in. A message will tell you
that the single login function is configured successfully.
During this process, the system automatically obtains the username parameter
name and the password parameter name. When the website login page requires
parameters other than the username and password, you may not configure single
login in this method.
Use IP network
Select the box to allow IP access to the resource.
If you select this item, you must configure an IP network resource for a website
and associate the IP network resource with the relevant users. When such a user
accesses the website from the SSL VPN web interface, the system automatically
logs the user in to the website through the IP network resource.
If you do not select this item, users access the resource through the web proxy.
Login Request Path
• When you select the IP network mode, this item specifies the path that the
system submits during single login. If you leave this field blank, the system uses
the address that is specified in the Website Address field.
• When the IP network mode is not selected, this item specifies the relative path
of the web proxy website. If you leave this field blank, the SSL VPN system uses
the default page specified in the Default Page field.
Username Parameter
Name
Specify the username parameter name that the system submits during automatic
login.
Password Parameter Name
Specify the password parameter name that the system submits during automatic
login.
Other parameters
Specify the other parameters for the system to submit during automatic login.
To add a parameter other than the username and password, click Add, enter the
parameter name and parameter value on the popup page and click Apply.
Configuring TCP application resources
You can configure the following types of TCP application resources:
• Remote access service resources
• Desktop sharing service resources