R3721-F3210-F3171-HP High-End Firewalls VPN Configuration Guide-6PW101

342
Figure 225 Notes services
Figure 226 Adding a Notes service resource
Table 37 Configuration items
Item Descri
p
tion
Resource Name
Enter a name for the Notes service resource.
The resource name must be unique in the SSL VPN system. Resources are uniquely identified
by their names.
IMPORTANT:
If you do not configure the command for Command, HP recommends including the resource
type, local address, and local port in the resource name so that users can view the desired
information after they log in to the SSL VPN system.
Remote Host Enter the host name or IP address of the Notes mail server.
Remote Port Enter the service port number of the Notes mail server.
Local Host
Enter a loopback address or a character string that represents a loopback address.
IMPORTANT:
The local host character string must be the same as the mail server name in the Notes
application. Otherwise, the Notes service resource cannot be used normally.
Local Port Enter the local port number. It must be the default port number of the Notes service.
Command
Configure the command for the resource.
Users must manually start the Notes service application. You do not need to configure this
item.
Configuring a common TCP service resource
The common TCP service of SSL VPN is designed to support various client/server applications. It is
widely used to access client/server TCP applications other than the previously mentioned ones.